Build The Bottle
Watermelon Wine Recipe D.I.Y.

Watermelon Wine Recipe D.I.Y.

Watermelon Wine Recipe D.I.Y.

Hey Guys and Gals!

Are you looking for an awesome Watermelon Wine Recipe you will find it below! So look no further you have found what you have been looking for! Below is the most awesome tasting Watermelon Wine Recipe’s in the world.


Step 1
  • 8 Cups of Watermelon Juice
  • 8 cups of water
  • 1.5 lbs. sugar
  • 2.5 tsp. Acid Blend
  • 1/8 tsp. Tannin
  • 1 tsp. Yeast Nutrient
  • 1 Campden Tablet
Step 2
  • 1 pack Lalvin K1-V1116 wine yeast



  • Primary fermenter (carboy)
  • stirring spoon
  • hydrometer,
  • straining bag
  • siphon tubing kit
  • 1 gallon carboy or jug
  • an airlock and bung
  • Sanitizer
  • (A thermometer and brewing belt may be used to monitor and control temperature.)


Make sure all equipment (i.e. stirring spoon, etc..) is sterilized you can bleach it or use . Contaminated equipment can let a stray yeast enter the wine and ruin it’s taste.


Step 1

Bring 2 cups water to boil and pour over sugar and citric acid to primary. Stir until completely dissolved let cool.

Chop up the watermelon squeeze the juice out till you have your 8 cups you can blend and use a cheesecloth or coffee filter to help get the job done.

Pour more water into carboy bringing the content in the carboy to a gallon.

Make sure that you don’t fill the carboy more then 2 thirds.

After two hours, stir in crushed Campden tablet and recover primary.

After 12 hours stir in pectic enzyme, yeast nutrient and 2-1/2 quarts cold water. Recover primary and set aside additional 12 hours.

Wait 24 hours, then you will add your prepared yeast.

Step 2

 Yeast Hydration and primary fermentation: in a large cup add 4 ounces of warm chlorine free water.

Stir the yeast into the water then let mixture stand in cup for 15 minutes, make sure it is bubbling and then you will add it to your wine.

Take your hydrometer reading and calculate all the measurements.

Attach your airlock and wait for your fermentation to be complete, let ferment with the pulp for 5-7 days gently agitate daily.

After 5-7 days when the foaming calms down you will siphon your wine off of the sediment into your secondary container which is usually your glass carboy.

(The sediment is the stuff that accumulates at the bottom of your container.)

Step 3

After you strained into your secondary carboy wait till the fermentation activity dies down (could be between several weeks to several months)

Final Step

Although yeast activity will decrease as the fermentation process proceeds, there will still be fermentation going on as long as you still see some foaming or bubbling.

then rack into a clean carboy.

After fermentation has stopped completely any remaining sugar required to sweeten it to suit your taste.

When the raspberry wine has cleared and is inactive – taste and bottle.

Stage 4: Aging / Bottling

You can repeat the racking process several times to get the maximum clarity though I would wait in-between each time a day or to, so the sediment can settle. I personally don’t like racking multiple times because of the risk of oxidation meaning the air touching it will give it a funny taste.

Bottle using the siphon cork and let wine sit for 6-12 months before drinking. Some would even prefer waiting 2 years!

Of Course If You Want To Learn About Alcohol Visit

Other Great Things To Know

From Our Sister Website

Give Us Some Love And Visit YelloVodka You Will Love The Experience

To spirits and cheers,

Binyomin Terebelo, Master Distiller and Drinkologist

Leave a Reply

Who’s Online

There are no users currently online