Malt Extract Beer Archives - Build The Bottle https://www.buildthebottle.com/tag/malt-extract-beer/ Distilleries-Blogging, Sharing Recipes, And Selling Bottles! Mon, 14 Sep 2020 14:17:07 +0000 en-US hourly 1 https://www.buildthebottle.com/wp-content/uploads/2023/12/Untitled-55-65x65.png Malt Extract Beer Archives - Build The Bottle https://www.buildthebottle.com/tag/malt-extract-beer/ 32 32 218777377 Lavender Beer Recipe D.I.Y. https://www.buildthebottle.com/2020/09/14/lavender-beer-recipe/ https://www.buildthebottle.com/2020/09/14/lavender-beer-recipe/#respond Mon, 14 Sep 2020 14:17:02 +0000 https://www.buildthebottle.com/?p=9099 Lavender Beer Recipe D.I.Y.Lavender Beer Recipe D.I.Y. smooth and just awesome impress all your friends when you pull out this delicious beer!

The post Lavender Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]>

Lavender Beer Recipe D.I.Y.

Hey Guys and Gals!

Are you looking for an awesome Lavender Beer Recipe? You now have no reason to look any further; you have just found what you have been looking for!

Yield: 5 US Gallons

Ingredients:

  • 3 lbs Pils Liquid Malt Extract
  • 3 lbs Wheat Liquid Malt Extract
  • 1 lb Wheat Dry Malt Extract
  • 75 oz Tettnanger pellet hops
  • 75 oz Saaz pellet hops
  • 1 tablespoon dried lavender flowers
  • 25 oz Saaz pellet hops
  • 25 oz freshly crushed coriander
  • 25 oz sweet orange peel
  • Omega Yeast Grand Cru

Directions

Step 1
  • 3 lbs Pils Liquid Malt Extract
  • 3 lbs Wheat Liquid Malt Extract
  • 1 lb Wheat Dry Malt Extract

Bring six gallons of water to a near-boil, around 200F. Turn off the flame.

Pour in all extract, stirring all the while to dissolve extract.

Once extract is complete dissolved, return to flame or heating element.

Bring wort to a boil the boil will be for 70 min.

Step 2
  • 75 oz Tettnanger pellet hops
  • 75 oz Saaz pellet hops

Add 10 min in to boil.

Step 3
  • 1 tablespoon dried lavender flowers

Add 5 min to the end of boil.

Step 4

  • 25 oz Saaz pellet hops
  • 25 oz freshly crushed coriander
  • 25 oz sweet orange peel

After the boil is over

Fermentation Through Bottling Lavender Beer Recipe

Transfer the wort into the primary fermenting vessel, then top off with cold water.

Aerate the wort at this point. This can be accomplished with an aeration stone or simply by rocking the fermenter back and forth once the lid is in place.

This is the time that you will want to take a specific gravity reading. Use a hydrometer and record the reading. Your targeted gravity levels though temperature will affect so you just need within range.
Step 6

Once the wort is cooled to around 72° F, it is safe to pitch the yeast. Pitch according the proper procedures of the type of yeast you have.

  • Omega Yeast Grand Cru

Prepare a 2L yeast starter by stirring the yeast into the water then let mixture stand in cup for 15 minutes, make sure it is bubbling and then you will add it to your beer after the beer has cooled.

Fermentation

Ferment for 1 week at yeasts suggested temp on package.

Make sure your carboy is around a third empty leaving space for frothing and foaming.

After primary fermentation rack into your secondary carboy and let sit for another week.

The less exposure to oxygen the better it will taste so be careful when you rack.

After secondary fermentation of about a week sterilize and then bottle cap. Siphon slowly so that that sediments don’t get mixed in.

Step 8
  • 1-1/4 cups dry malt extract for priming or 3/4 cup priming sugar

Add priming sugar before bottling.

Prime and bottle. When priming, dissolve corn sugar or dry malt extract in two pints of boiling water for 5 minutes.

Pour this mixture into the empty bottling bucket and siphon the beer from the fermenter over it.

This method ensures that the priming sugar will disperse evenly through your beer.

For proper carbonation, store your beer at 75° for at least the first week after bottling.

This will allow the yeast to feed on the priming sugar and produce the necessary carbon dioxide needed for carbonation.

Congratulations, You Have Completed Making this Awesome Lavender Beer!

You now need a bottle and a label which are cool enough to compliment your hard work. Honestly, if you put it into a cheap bottle, people will make fun of you. BUT, if it looks good, people will rave about it!

Additional Info

Notes on Utensils and Ingredients

  • Glass is always preferable when working with strong alcohol. Avoid plastic as much as possible.
  • Use organic ingredients to avoid pesticide residues.

You Like Our Recipes So Try Our Vodka

Other Great Recipes for You to Check Out!

From Our Sister Blog Terebelo.com

To spirits and cheers,

Binyomin Terebelo, Master Distiller and Drinkoligist

Image by Rebekka D from Pixabay

The post Lavender Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]> https://www.buildthebottle.com/2020/09/14/lavender-beer-recipe/feed/ 0 9099 Blueberry Beer Recipe D.I.Y. https://www.buildthebottle.com/2020/08/31/blueberry-beer-recipe/ https://www.buildthebottle.com/2020/08/31/blueberry-beer-recipe/#respond Mon, 31 Aug 2020 13:15:22 +0000 https://www.buildthebottle.com/?p=8510 Blueberry Beer Recipe D.I.Y.Blueberry Beer Recipe D.I.Y. a great Blueberry beer if there ever was one to make its this one!

The post Blueberry Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]>

Blueberry Beer Recipe D.I.Y.

Hey Guys and Gals!

Are you looking for an awesome Blueberry Beer Recipe? You now have no reason to look any further; you have just found what you have been looking for!

Yield: 5 US Gallons

Ingredients:

  • Munich – UK half a pound
  • Crystal 15L – CA half a pound
  • Dry Malt Extract – Wheat – US 6 pounds
  • Hallertau oz-1 type Pellet usage Boil time 60 min
  • Saaz oz-1 type Pellet usage Boil time 15 min
  • Wyeast American Wheat 1010
  • blueberry 6 lb usage Secondary

Directions;

Step 1
  • Munich – UK half a pound
  • Crystal 15L – CA half a pound

1.Steep grains at 150 for 30 minutes

2.Add extract and boil for 60 minutes

3.Cool wort and add water to make 5 gallons

4.After primary fermentation,

rack onto 6 lbs of pureed blueberries

Step 2
  • Dry Malt Extract – Wheat – US 6 pounds
  • Hallertau oz 1 type Pellet usage Boil time 60 min

Bring to a boil add extract set the timer at 60 min.

Step 3
  • Saaz oz 1 type Pellet usage Boil time 15 min

Add in 45 min to boil.

Fermentation Through Bottling Blueberry Beer Recipe

Transfer the wort into the primary fermenting vessel, then top off with cold water.

Aerate the wort at this point. This can be accomplished with an aeration stone or simply by rocking the fermenter back and forth once the lid is in place.

This is the time that you will want to take a specific gravity reading. Use a hydrometer and record the reading. Your targeted gravity levels though temperature will affect so you just need within range.
Step 6

Once the wort is cooled to around 72° F, it is safe to pitch the yeast. Pitch according the proper procedures of the type of yeast you have.

  • Wyeast American Wheat 1010

Prepare a 2L yeast starter by stirring the yeast into the water then let mixture stand in cup for 15 minutes, make sure it is bubbling and then you will add it to your beer after the beer has cooled.

Fermentation

Ferment for 1 week at yeasts suggested temp on package.

Make sure your carboy is around a third empty leaving space for frothing and foaming.

After primary fermentation rack into your secondary carboy and let sit for another week.

The less exposure to oxygen the better it will taste so be careful when you rack.

Step 7
  • blueberry 6 lb

Chop and puree the blueberries and add to secondary carboy.

After secondary fermentation of about a week sterilize and then bottle cap. Siphon slowly so that that sediments don’t get mixed in.

Step 8
  • 1-1/4 cups dry malt extract for priming or 3/4 cup priming sugar

Add priming sugar before bottling.

Prime and bottle. When priming, dissolve corn sugar or dry malt extract in two pints of boiling water for 5 minutes.

Pour this mixture into the empty bottling bucket and siphon the beer from the fermenter over it.

This method ensures that the priming sugar will disperse evenly through your beer.

For proper carbonation, store your beer at 75° for at least the first week after bottling.

This will allow the yeast to feed on the priming sugar and produce the necessary carbon dioxide needed for carbonation.

Congratulations, You Have Completed Making this Awesome Blueberry Beer!

You now need a bottle and a label which are cool enough to compliment your hard work. Honestly, if you put it into a cheap bottle, people will make fun of you. BUT, if it looks good, people will rave about it!

Additional Info

Notes on Utensils and Ingredients

  • Glass is always preferable when working with strong alcohol. Avoid plastic as much as possible.
  • Use organic ingredients to avoid pesticide residues.

You Like Our Recipes So Try Our Vodka

Other Great Recipes for You to Check Out!

From Our Sister Blog Terebelo.com

To spirits and cheers,

Binyomin Terebelo, Master Distiller and Drinkoligist

Image by Free-Photos from Pixabay

The post Blueberry Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]> https://www.buildthebottle.com/2020/08/31/blueberry-beer-recipe/feed/ 0 8510 Cucumber Beer Recipe D.I.Y. https://www.buildthebottle.com/2020/08/18/cucumber-beer-recipe/ https://www.buildthebottle.com/2020/08/18/cucumber-beer-recipe/#respond Tue, 18 Aug 2020 17:22:12 +0000 https://www.buildthebottle.com/?p=8076 Cucumber Beer Recipe D.I.Y.Cucumber Beer Recipe D.I.Y. A new crispy crunch to your bottle you will not stop crunching away!

The post Cucumber Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]>

Cucumber Beer Recipe D.I.Y.

Hey Guys and Gals!

Are you looking for an awesome Cucumber Beer Recipe? You now have no reason to look any further; you have just found what you have been looking for!

Yield: 5 US Gallons

Ingredients:

  •  
  • 8 oz flaked oats
  • 8 oz torrified wheat
  • 6lb Pilsner liquid malt extract
  • 1 lb Vienna malt
  • 1 oz Nugget hops (60 Minute Boil)
  • 8 oz Turbinado sugar
  • 10 g gypsum (to fortify the water)
  • ¼ tsp Irish moss
  • 1 pkg of WLP568 – Belgian style Saison ale yeast blend
  • 1 14 oz bag frozen lime pulp (for secondary)
  • 2 seedless, English cucumbers (for secondary)

Directions;

Step 1
  • 8 oz flaked oats
  • 8 oz torrified wheat

Bring 5 gallons of water to about 170F add in grains using a grain bag. Make sure the temp gets lower to about 154F this should happen by itself after you put in the grains . Let mash for 60 min.

Remove the grains.

Bring water to a boil but be careful to avoid a “Boil Over. This Boil will last for 60 min.

Step 2
  • 6lb Pilsner liquid malt extract
  • 1 lb Vienna malt
  • 1 oz Nugget hops

Add at the beginning of boil

Step 3
  • 10 g gypsum (to fortify the water)

Add 15 min into the boil.

Step 4
  • 8 oz Turbinado sugar
  • ¼ tsp Irish moss

15 before the end of boil.

Fermentation Through Bottling Cucumber Beer Recipe

Transfer the wort into the primary fermenting vessel, then top off with cold water.

Aerate the wort at this point. This can be accomplished with an aeration stone or simply by rocking the fermenter back and forth once the lid is in place.

This is the time that you will want to take a specific gravity reading. Use a hydrometer and record the reading. Your targeted gravity levels though temperature will affect so you just need within range.
Step 5

Once the wort is cooled to around 72° F, it is safe to pitch the yeast. Pitch according the proper procedures of the type of yeast you have.

  • 1 pkg of WLP568 – Belgian style Saison ale yeast blend

Prepare a 2L yeast starter by stirring the yeast into the water then let mixture stand in cup for 15 minutes, make sure it is bubbling and then you will add it to your beer after the beer has cooled.

(If you are making your own lime pulp make it now)

Fermentation

Top off to 5 gallons ferment for 1 week at yeasts suggested temp on package.

Make sure your carboy is around a third empty leaving space for frothing and foaming.

After primary fermentation rack into your secondary carboy and let sit for another week.

The less exposure to oxygen the better it will taste so be careful when you rack.

Step 6
  • 1 14 oz bag frozen lime pulp (for secondary)
  • 2 seedless, English cucumbers (for secondary)

Chop up the cucumbers and add with frozen lime pulp to secondary.

After secondary fermentation of about a week sterilize and then bottle cap. Siphon slowly so that that sediments don’t get mixed in.

Step 7
  • 1-1/4 cups dry malt extract for priming or 3/4 cup priming sugar

Add priming sugar before bottling.

Prime and bottle. When priming, dissolve corn sugar or dry malt extract in two pints of boiling water for 5 minutes.

Pour this mixture into the empty bottling bucket and siphon the beer from the fermenter over it.

This method ensures that the priming sugar will disperse evenly through your beer.

For proper carbonation, store your beer at 75° for at least the first week after bottling.

This will allow the yeast to feed on the priming sugar and produce the necessary carbon dioxide needed for carbonation.

Congratulations, You Have Completed Making this Awesome Cucumber Beer!

You now need a bottle and a label which are cool enough to compliment your hard work. Honestly, if you put it into a cheap bottle, people will make fun of you. BUT, if it looks good, people will rave about it!

Additional Info

Notes on Utensils and Ingredients

  • Glass is always preferable when working with strong alcohol. Avoid plastic as much as possible.
  • Use organic ingredients to avoid pesticide residues.

You Like Our Recipes So Try Our Vodka

Other Great Recipes for You to Check Out!

From Our Sister Blog Terebelo.com

To spirits and cheers,

Binyomin Terebelo, Master Distiller and Drinkoligist

Image by Steve Buissinne from Pixabay

The post Cucumber Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]> https://www.buildthebottle.com/2020/08/18/cucumber-beer-recipe/feed/ 0 8076 Gooseberry Beer Recipe D.I.Y. https://www.buildthebottle.com/2020/08/18/gooseberry-beer-recipe/ https://www.buildthebottle.com/2020/08/18/gooseberry-beer-recipe/#respond Tue, 18 Aug 2020 16:20:40 +0000 https://www.buildthebottle.com/?p=8088 Gooseberry Beer Recipe D.I.Y.Gooseberry Beer Recipe D.I.Y. Have a drink that is such a pleasure to drink you will not want to share a bottle!

The post Gooseberry Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]>

Gooseberry Beer Recipe D.I.Y.

Hey Guys and Gals!

Are you looking for an awesome Gooseberry Beer Recipe? You now have no reason to look any further; you have just found what you have been looking for!

Yield: 6 US Gallons

Ingredients:

  • 12 Lb Canadian – Pale 2-Row
  • 0.50 lb Canadian – Honey Malt
  • 0.50 lb German – Wheat Malt
  • 0.25 lb Flaked Wheat
  • 0.12 lb  American – Aromatic Malt
  • 1 oz Amarillo 60
  • 1 oz Summit 30
  • 1 oz Cascade 10
  • 1 oz Cascade-Whole Leaf
  • Fermentis – Safale – English Ale Yeast S-04
  • 2 oz Amarillo Dry hops 7 days

Instructions

Step 1
  • 12 Lb Canadian – Pale 2-Row
  • 0.50 lb Canadian – Honey Malt
  • 0.50 lb German – Wheat Malt
  • 0.25 lb Flaked Wheat
  • 0.12 lb  American – Aromatic Malt

Bring 5 gallons of water to about 170F add in grains using a grain bag. Make sure the temp gets lower to about 154F this should happen by itself after you put in the grains . Let mash for 60 min.

Remove the grains.

Bring water to a boil but be careful to avoid a “Boil Over. This Boil will last for 60 min.

Step 2
  • 1 oz Amarillo 60

Add at the beginning of the boil

Step 3
  • 1 oz Summit 30

Add halfway into the boil.

Step 4
  • 1 oz Cascade 10

Add 10 min of boil.

Step 5
  • 1 oz Cascade-Whole Leaf

1 min to the end of the boil.

Step 6
  • Gooseberries

Pop the gooseberries, and add now or before secondary fermentation for a sweeter gooseberry beer.

Fermentation Through Bottling Gooseberry Beer Recipe

Transfer the wort into the primary fermenting vessel, then top off with cold water.

Aerate the wort at this point. This can be accomplished with an aeration stone or simply by rocking the fermenter back and forth once the lid is in place.

This is the time that you will want to take a specific gravity reading. Use a hydrometer and record the reading. Your targeted gravity levels though temperature will affect so you just need within range.
Step 7

Once the wort is cooled to around 72° F, it is safe to pitch the yeast. Pitch according the proper procedures of the type of yeast you have.

  • Fermentis – Safale – English Ale Yeast S-04

Prepare a 2L yeast starter by stirring the yeast into the water then let mixture stand in cup for 15 minutes, make sure it is bubbling and then you will add it to your beer after the beer has cooled.

Fermentation

Top to 6 gallons ferment for 1 week at yeasts suggested temp on package.

Make sure your carboy is around a third empty leaving space for frothing and foaming.

After primary fermentation rack into your secondary carboy and let sit for another week.

The less exposure to oxygen the better it will taste so be careful when you rack.

Step 8
  • 2 oz Amarillo Dry hops 7 days

After secondary fermentation of about a week sterilize and then bottle cap. Siphon slowly so that that sediments don’t get mixed in.

Step 9
  • 1-1/4 cups dry malt extract for priming or 3/4 cup priming sugar

Add priming sugar before bottling.

Prime and bottle. When priming, dissolve corn sugar or dry malt extract in two pints of boiling water for 5 minutes.

Pour this mixture into the empty bottling bucket and siphon the beer from the fermenter over it.

This method ensures that the priming sugar will disperse evenly through your beer.

For proper carbonation, store your beer at 75° for at least the first week after bottling.

This will allow the yeast to feed on the priming sugar and produce the necessary carbon dioxide needed for carbonation.

Congratulations, You Have Completed Making this Awesome Gooseberry Beer!

You now need a bottle and a label which are cool enough to compliment your hard work. Honestly, if you put it into a cheap bottle, people will make fun of you. BUT, if it looks good, people will rave about it!

Additional Info

Notes on Utensils and Ingredients

  • Glass is always preferable when working with strong alcohol. Avoid plastic as much as possible.
  • Use organic ingredients to avoid pesticide residues.

You Like Our Recipes So Try Our Vodka

Other Great Recipes for You to Check Out!

From Our Sister Blog Terebelo.com

To spirits and cheers,

Binyomin Terebelo, Master Distiller and Drinkoligist

Image by Varintorn Kantawong from Pixabay

The post Gooseberry Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]> https://www.buildthebottle.com/2020/08/18/gooseberry-beer-recipe/feed/ 0 8088 Red Dragon Fruit Beer Recipe D.I.Y. https://www.buildthebottle.com/2020/08/12/red-dragon-fruit-beer-recipe/ https://www.buildthebottle.com/2020/08/12/red-dragon-fruit-beer-recipe/#respond Wed, 12 Aug 2020 15:50:20 +0000 https://www.buildthebottle.com/?p=7865 Red Dragon Fruit Beer Recipe D.I.Y.Red Dragon Fruit Beer Recipe D.I.Y. have a drink that you will just love to share with friends and family every day!

The post Red Dragon Fruit Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]>

Red Dragon Fruit Beer Recipe D.I.Y.

Hey Guys and Gals!

Are you looking for an awesome Red Dragon Fruit Beer Recipe? You now have no reason to look any further; you have just found what you have been looking for!

Yield: 5 US Gallons

Ingredients:

  •  1 lb Crustal malt — crushed
  • 1/3 lb Amber plain malt
  • 2 lb M&F amber dme
  • 2 oz Northern brewer hops for Boiling
  • 1 oz Fuggles hops for Finishing
  • 4 lb Red Dragon Fruit
  • 1 pk EDME ale yeast

Directions;

Step 1
  • 1 lb Crustal malt — crushed

Put crushed grains in muslin bag & place in 1 gal of cold water. bring to a boil then remove grain bag,

Step 2
  • 1/3 lb Amber plain malt dme
  • 2 lb M&F amber dme

Remove pot from heat and add syrup & DME. Stir until dissolved.

Step 3
  • 2 oz Northern brewer hops for Boiling

Return pot to heat & add 2 oz northern brewer hops. Boil for 30-45 minutes.

Step 4
  • 1 oz Fuggles hops for Finishing

Add the figgles hops for the last 5 min of boil.

Step 5
  • 4 lb Red Dragon Fruit

Chop and/or puree fruit. Add to wort when the boiling is finished. Do not boil the fruit.

Steep for 1/2 hour then add 4 gal of cold water. (You can leave the fruit in the wort thru through primary stage)

The longer you leave it in, the stronger the fruit flavor will be.

Fermentation Through Bottling Red Dragon Fruit Beer Recipe

Transfer the wort into the primary fermenting vessel, then top off with cold water.

Aerate the wort at this point. This can be accomplished with an aeration stone or simply by rocking the fermenter back and forth once the lid is in place.

This is the time that you will want to take a specific gravity reading. Use a hydrometer and record the reading. Your targeted gravity levels though temperature will affect so you just need within range.
Step 6

Once the wort is cooled to around 72° F, it is safe to pitch the yeast. Pitch according the proper procedures of the type of yeast you have.

  • 1 pk EDME ale yeast

Prepare a 2L yeast starter by stirring the yeast into the water then let mixture stand in cup for 15 minutes, make sure it is bubbling and then you will add it to your beer after the beer has cooled.

Fermentation

Ferment for 1 week at yeasts suggested temp on package.

Make sure your carboy is around a third empty leaving space for frothing and foaming.

After primary fermentation rack into your secondary carboy and let sit for another week.

The less exposure to oxygen the better it will taste so be careful when you rack.

(if you are adding dry hops you may add it now 1 ounce of your choosing)

After secondary fermentation of about a week sterilize and then bottle cap. Siphon slowly so that that sediments don’t get mixed in.

Step 6
  • 1-1/4 cups dry malt extract for priming or 3/4 cup priming sugar

Add priming sugar before bottling.

Prime and bottle. When priming, dissolve corn sugar or dry malt extract in two pints of boiling water for 5 minutes.

Pour this mixture into the empty bottling bucket and siphon the beer from the fermenter over it.

This method ensures that the priming sugar will disperse evenly through your beer.

For proper carbonation, store your beer at 75° for at least the first week after bottling.

This will allow the yeast to feed on the priming sugar and produce the necessary carbon dioxide needed for carbonation.

Congratulations, You Have Completed Making this Awesome Red Dragon Fruit Beer!

You now need a bottle and a label which are cool enough to compliment your hard work. Honestly, if you put it into a cheap bottle, people will make fun of you. BUT, if it looks good, people will rave about it!

Additional Info

Notes on Utensils and Ingredients

  • Glass is always preferable when working with strong alcohol. Avoid plastic as much as possible.
  • Use organic ingredients to avoid pesticide residues.

You Like Our Recipes So Try Our Vodka

Other Great Recipes for You to Check Out!

From Our Sister Blog Terebelo.com

To spirits and cheers,

Binyomin Terebelo, Master Distiller and Drinkoligist

Image by Varintorn Kantawong from Pixabay

The post Red Dragon Fruit Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]> https://www.buildthebottle.com/2020/08/12/red-dragon-fruit-beer-recipe/feed/ 0 7865 Dragon Fruit Beer Recipe D.I.Y. https://www.buildthebottle.com/2020/08/12/dragon-fruit-beer-recipe/ https://www.buildthebottle.com/2020/08/12/dragon-fruit-beer-recipe/#respond Wed, 12 Aug 2020 15:03:44 +0000 https://www.buildthebottle.com/?p=7853 Dragon Fruit Beer Recipe D.I.Y.Dragon Fruit Beer Recipe D.I.Y. Pure joy and so refreshing watch your friends faces light up as they sip!

The post Dragon Fruit Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]>

Dragon Fruit Beer Recipe D.I.Y.

Hey Guys and Gals!

Are you looking for an awesome Dragon Fruit Beer Recipe? You now have no reason to look any further; you have just found what you have been looking for!

Yield: 5 US Gallons

Ingredients:

  • 7 LB. Munton’s plain wheat extract
  • 1-1/2 oz. Tettnang hops
  • 1/2 oz. East Kent Golding hops
  • 3 ripe white Dragon Fruits, flesh only and puree
  • 1/2 teaspoon Irish Moss
  • Wyeast #1338 European Ale yeast
Directions;

All the equipment or comes into contact with brew must be sanitized. Though the fermenting equipment can be done while the wort is cooling. Be sure to clean and sanitize the fermenters, airlock, lid, hose, hydrometer and test jar and rubber stopper.

Step 1
  • Bring water to a boil then add extract mixture and Irish Moss to boil.

You will now let it boil for 60 min.

Step 2
  • Add Tettnang hops

15 min into the boil.

Step 3
  • Add Golding pellets.

5 mins before the end of the boil.

Step 4
  • 0.5 oz (14 g) Cascade whole hops, 6% a.a. (5 min)

Add 5 min before the end of the boil.

Fermentation Through Bottling Dragon Fruit Beer Recipe

Once the boiling period is over, it is time to cool the wort. If you have a wort chiller use it now. Then strain out the hops.

Step 5
  • Puree the dragon fruit and add to the beer.

Transfer the wort into the primary fermenting vessel, then top off with cold water.

Aerate the wort at this point. This can be accomplished with an aeration stone or simply by rocking the fermenter back and forth once the lid is in place.

This is the time that you will want to take a specific gravity reading. Use a hydrometer and record the reading. Your targeted gravity levels though temperature will affect so you just need within range.
Step 6

Once the wort is cooled to around 72° F, it is safe to pitch the yeast. Pitch according the proper procedures of the type of yeast you have.

  • Wyeast #1338 European Ale yeast

Prepare a 2L yeast starter by stirring the yeast into the water then let mixture stand in cup for 15 minutes, make sure it is bubbling and then you will add it to your beer after the beer has cooled.

Fermentation

Ferment for 1 week at yeasts suggested temp on package.

Make sure your carboy is around a third empty leaving space for frothing and foaming.

After primary fermentation rack into your secondary carboy and let sit for another week.

The less exposure to oxygen the better it will taste so be careful when you rack.

(if you are adding dry hops you may add it now 1 ounce of your choosing)

After secondary fermentation of about a week sterilize and then bottle cap. Siphon slowly so that that sediments don’t get mixed in.

Step 6
  • 1-1/4 cups dry malt extract for priming or 3/4 cup priming sugar

Add priming sugar before bottling.

Prime and bottle. When priming, dissolve corn sugar or dry malt extract in two pints of boiling water for 5 minutes.

Pour this mixture into the empty bottling bucket and siphon the beer from the fermenter over it.

This method ensures that the priming sugar will disperse evenly through your beer.

For proper carbonation, store your beer at 75° for at least the first week after bottling.

This will allow the yeast to feed on the priming sugar and produce the necessary carbon dioxide needed for carbonation.

Congratulations, You Have Completed Making this Awesome Dragon Fruit Beer!

You now need a bottle and a label which are cool enough to compliment your hard work. Honestly, if you put it into a cheap bottle, people will make fun of you. BUT, if it looks good, people will rave about it!

Additional Info

Notes on Utensils and Ingredients

  • Glass is always preferable when working with strong alcohol. Avoid plastic as much as possible.
  • Use organic ingredients to avoid pesticide residues.

You Like Our Recipes So Try Our Vodka

Other Great Recipes for You to Check Out!

From Our Sister Blog Terebelo.com

To spirits and cheers,

Binyomin Terebelo, Master Distiller and Drinkoligist

The post Dragon Fruit Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]> https://www.buildthebottle.com/2020/08/12/dragon-fruit-beer-recipe/feed/ 0 7853 Bronx Brew Beer Recipe D.I.Y. https://www.buildthebottle.com/2020/07/14/bronx-brew-beer-recipe/ https://www.buildthebottle.com/2020/07/14/bronx-brew-beer-recipe/#respond Tue, 14 Jul 2020 12:40:43 +0000 http://www.buildthebottle.com/?p=6677 Bronx Brew Beer Recipe D.I.Y.Bronx Brew Beer Recipe D.I.Y. A dream to make a pleasure to drink need I say more to get you to make this awesome beer so get brewing now!

The post Bronx Brew Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]>

Bronx Brew Beer Recipe D.I.Y.

Hey Guys and Gals!

Are you looking for an awesome Bronx Brew Beer Recipe? You now have no reason to look any further; you have just found what you have been looking for!

Beer Style: Fruit Beer 
Recipe Type: partial mash
Yield: 5 US gallons

Ingredients:

  • 22.5 kg (5.5 lb) pale malt
  • 1 kg (2.2 lb) light extract syrup (I use Cooper’s)
  • 100 gr (3.5 oz) 80L crystal
  • 100 gr (3.5 oz) amber malt
  • 500 gr (1.1 lb) wheat malt
  • 150 gr (5.3 oz) flaked barley
  • 25 gr (0.9 oz) 7.1%AA Willamette flowers 60 min
  • 20 gr (0.7 oz) 4.3%AA Styrian Goldings flowers 2 min
  • 600 gr (1.3 lb) frozen raspberries
  • gelatin finings
  • Wyeast 1028

Directions

All the equipment or comes into contact with brew must be sanitized. Though the fermenting equipment can be done while the wort is cooling. Be sure to clean and sanitize the fermenters, airlock, lid, hose, hydrometer and test jar and rubber stopper.

Step 1
  • 22.5 kg (5.5 lb) pale malt
  • 1 kg (2.2 lb) light extract syrup (I use Cooper’s)
  • 100 gr (3.5 oz) 80L crystal
  • 100 gr (3.5 oz) amber malt
  • 500 gr (1.1 lb) wheat malt
  • 150 gr (5.3 oz) flaked barley

Heat up 5 gallons of water to about 150 add the grains which should lower the temp to 50C (122F) for 30 min,

Then mash at 68C (154F) for 90 min

Mashout at 77C (170F) for 10 min, sparge to recover about 15 litres (about 4 US gal).

Now you will bring the the beer to a boil but be careful to avoid a “Boil Over. This Boil will last for 60 min.

Step 2
  • 25 gr (0.9 oz) 7.1%AA Willamette flowers 60 min

Add at the beginning of boil.

Step 3
  • 20 gr (0.7 oz) 4.3%AA Styrian Goldings flowers

Add 2 mins before the end of boil.

Step 4
  • 600 gr (1.3 lb) frozen raspberries

Add after the flame is off and let soak inside for 30-45 minutes it is helpful to pierce the berries before placing in brew to extract the juices.

Fermentation Through Bottling Bronx Brew Beer Recipe

Once the boiling period is over, it is time to cool the wort. If you have a wort chiller use it now.

Transfer the wort into the primary fermenting vessel, then top off with cold water.

Aerate the wort at this point. This can be accomplished with an aeration stone or simply by rocking the fermenter back and forth once the lid is in place.

This is the time that you will want to take a specific gravity reading. Use a hydrometer and record the reading. Your targeted gravity levels though temperature will affect so you just need within range.
Step 5

Once the wort is cooled to around 72° F, it is safe to pitch the yeast. Pitch according the proper procedures of the type of yeast you have.

  • Wyeast 1028

Prepare a 2L yeast starter by stirring the yeast into the water then let mixture stand in cup for 15 minutes, make sure it is bubbling and then you will add it to your beer after the beer has cooled.

Fermentation

Ferment for 1 week at yeasts suggested temp on package.

Make sure your carboy is around a third empty leaving space for frothing and foaming.

After primary fermentation rack into your secondary carboy and let sit for another week.

Step 6

The less exposure to oxygen the better it will taste so be careful when you rack.

After secondary fermentation of about a week sterilize and then bottle cap. Siphon slowly so that that sediments don’t get mixed in.

Step 5
  • 3 oz of priming sugar

Add priming sugar before bottling.

Congratulations, You Have Completed Making this Awesome Bronx Brew Beer!

You now need a bottle and a label which are cool enough to compliment your hard work. Honestly, if you put it into a cheap bottle, people will make fun of you. BUT, if it looks good, people will rave about it!

Additional Info

Notes on Utensils and Ingredients

  • Glass is always preferable when working with strong alcohol. Avoid plastic as much as possible.
  • Use organic ingredients to avoid pesticide residues.

You Like Our Recipes So Try Our Vodka

Other Great Recipes for You to Check Out!

From Our Sister Blog Terebelo.com

You Will Find Great Analysis At tastethebottle.com Of Yor Favorite Bottle

To spirits and cheers,

Binyomin Terebelo, Master Distiller and Drinkoligist

Image by David Mark from Pixabay

The post Bronx Brew Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]> https://www.buildthebottle.com/2020/07/14/bronx-brew-beer-recipe/feed/ 0 6677 Easy Porter Beer Recipe D.I.Y. https://www.buildthebottle.com/2020/07/14/easy-porter-beer-recipe/ https://www.buildthebottle.com/2020/07/14/easy-porter-beer-recipe/#respond Tue, 14 Jul 2020 12:22:08 +0000 http://www.buildthebottle.com/?p=6684 Easy Porter Beer Recipe D.I.Y.Easy Porter Beer Recipe D.I.Y. A true and easy treat this recipe can not be beat so get brewing now!

The post Easy Porter Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]>

Easy Porter Beer Recipe D.I.Y.

Hey Guys and Gals!

Are you looking for an awesome Easy Porter Beer Recipe? You now have no reason to look any further; you have just found what you have been looking for!


Yield: 5.00 US Gallons

Ingredients:

  • 0.5 lbs chocolate malt, crushed
  • 6.6 lbs Munton & Fison amber malt extract
  • 0.5 lbs Munton & Fison light dry malt extract
  • 2.5 oz Cascade hops pellets, boiling

Directions

All the equipment or comes into contact with brew must be sanitized. Though the fermenting equipment can be done while the wort is cooling. Be sure to clean and sanitize the fermenters, airlock, lid, hose, hydrometer and test jar and rubber stopper.

Step 1
  • 0.5 lbs chocolate malt, crushed

Place into water

Bring 3.25-3.5 gallons of water to a boil.

Remove the chocolate malt bag.

but be careful to avoid a “Boil Over. This Boil will last for 55 min.

Step 2
  • 6.6 lbs Munton & Fison amber malt extract
  • 0.5 lbs Munton & Fison light dry malt extract
  • 2.5 oz Cascade hops pellets

Add at the beginning of boil.

Fermentation Through Bottling Easy Porter Beer Recipe

Once the boiling period is over, it is time to cool the wort. If you have a wort chiller use it now.

Transfer the wort into the primary fermenting vessel, then top off with cold water.

Aerate the wort at this point. This can be accomplished with an aeration stone or simply by rocking the fermenter back and forth once the lid is in place.

This is the time that you will want to take a specific gravity reading. Use a hydrometer and record the reading. Your targeted gravity levels though temperature will affect so you just need within range.
Step 3

Once the wort is cooled to around 72° F, it is safe to pitch the yeast. Pitch according the proper procedures of the type of yeast you have.

  • American liquid yeast pick your choice

Prepare a 2L yeast starter by stirring the yeast into the water then let mixture stand in cup for 15 minutes, make sure it is bubbling and then you will add it to your beer after the beer has cooled.

Fermentation

Ferment for 1 week at yeasts suggested temp on package.

Make sure your carboy is around a third empty leaving space for frothing and foaming.

After primary fermentation rack into your secondary carboy and let sit for another week.

Step 4

The less exposure to oxygen the better it will taste so be careful when you rack.

After secondary fermentation of about a week sterilize and then bottle cap. Siphon slowly so that that sediments don’t get mixed in.

Step 5
  • 3 oz of priming sugar

Add priming sugar before bottling.

Congratulations, You Have Completed Making this Awesome Easy Porter Beer!

You now need a bottle and a label which are cool enough to compliment your hard work. Honestly, if you put it into a cheap bottle, people will make fun of you. BUT, if it looks good, people will rave about it!

Additional Info

Notes on Utensils and Ingredients

  • Glass is always preferable when working with strong alcohol. Avoid plastic as much as possible.
  • Use organic ingredients to avoid pesticide residues.

You Like Our Recipes So Try Our Vodka

Other Great Recipes for You to Check Out!

From Our Sister Blog Terebelo.com

You Will Find Great Analysis At tastethebottle.com Of Yor Favorite Bottle

To spirits and cheers,

Binyomin Terebelo, Master Distiller and Drinkoligist

Image by Michael Tampakakis from Pixabay

The post Easy Porter Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]> https://www.buildthebottle.com/2020/07/14/easy-porter-beer-recipe/feed/ 0 6684 Pilsner Big Bang Ale Beer Recipe D.I.Y. https://www.buildthebottle.com/2020/07/02/pilsner-big-bang-ale-beer-recipe/ https://www.buildthebottle.com/2020/07/02/pilsner-big-bang-ale-beer-recipe/#respond Thu, 02 Jul 2020 23:46:37 +0000 http://www.buildthebottle.com/?p=6375 Pilsner Big Bang Ale Beer Recipe D.I.Y.Pilsner Big Bang Ale Beer Recipe D.I.Y. Have a great beer at the ready and every party will be a huge bang!

The post Pilsner Big Bang Ale Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]>

Pilsner Big Bang Ale Beer Recipe D.I.Y.

Hey Guys and Gals!

Are you looking for an awesome Pilsner Big Bang Ale Beer Recipe? You now have no reason to look any further; you have just found what you have been looking for!

Original Gravity: 1.042
Final Gravity: 1.015
Alcohol by Vol: 3.54%
Recipe Type: extract
Yield: 5.00 US Gallons

Ingredients:

  • 2 lbs Liquid extract
  • 3 lbs DME
  • 1 lbs Rice extract
  • 1 1/2 oz Willamette for bittering
  • 1/2 oz Willamette for dry hopping aroma
  • American liquid Wyeast yeast

Directions

All the equipment or comes into contact with brew must be sanitized. Though the fermenting equipment can be done while the wort is cooling. Be sure to clean and sanitize the fermenters, airlock, lid, hose, hydrometer and test jar and rubber stopper.

Step 1
  • 2 lbs Liquid extract
  • 3 lbs DME
  • 1 lbs Rice extract

Bring 3.25-3.5 gallons of water to a boil.

but be careful to avoid a “Boil Over. This Boil will last for 60 min.

Step 2
  • 1 1/2 oz Willamette for bittering

Add at the beginning of boil.

Fermentation Through Bottling Pilsner Big Bang Ale Recipe

Once the boiling period is over, it is time to cool the wort. If you have a wort chiller use it now.

Transfer the wort into the primary fermenting vessel, then top off with cold water.

Aerate the wort at this point. This can be accomplished with an aeration stone or simply by rocking the fermenter back and forth once the lid is in place.

This is the time that you will want to take a specific gravity reading. Use a hydrometer and record the reading. Your targeted gravity levels though temperature will affect so you just need within range.
Step 3

Once the wort is cooled to around 72° F, it is safe to pitch the yeast. Pitch according the proper procedures of the type of yeast you have.

  • American liquid Wyeast yeast

Prepare a 2L yeast starter by stirring the yeast into the water then let mixture stand in cup for 15 minutes, make sure it is bubbling and then you will add it to your beer after the beer has cooled.

Fermentation

Ferment for 1 week at yeasts suggested temp on package.

Make sure your carboy is around a third empty leaving space for frothing and foaming.

After primary fermentation rack into your secondary carboy and let sit for another week.

Step 4
  • 1/2 oz Willamette for dry hopping aroma

Add dry hops to secondary carboy.

The less exposure to oxygen the better it will taste so be careful when you rack.

After secondary fermentation of about a week sterilize and then bottle cap. Siphon slowly so that that sediments don’t get mixed in.

Step 5
  • 3 oz of priming sugar

Add priming sugar before bottling.

Congratulations, You Have Completed Making this Awesome Pilsner Big Bang Ale Beer!

You now need a bottle and a label which are cool enough to compliment your hard work. Honestly, if you put it into a cheap bottle, people will make fun of you. BUT, if it looks good, people will rave about it!

Additional Info

Notes on Utensils and Ingredients

  • Glass is always preferable when working with strong alcohol. Avoid plastic as much as possible.
  • Use organic ingredients to avoid pesticide residues.

You Like Our Recipes So Try Our Vodka

Other Great Recipes for You to Check Out!

From Our Sister Blog Terebelo.com

You Will Find Great Analysis At tastethebottle.com Of Yor Favorite Bottle

To spirits and cheers,

Binyomin Terebelo, Master Distiller and Drinkoligist

Image by Gerd Altmann from Pixabay

The post Pilsner Big Bang Ale Beer Recipe D.I.Y. appeared first on Build The Bottle.

]]> https://www.buildthebottle.com/2020/07/02/pilsner-big-bang-ale-beer-recipe/feed/ 0 6375