Build The Bottle
Medlar Wine Recipe D.I.Y.

Medlar Wine Recipe D.I.Y.

Spread the love
  •  
  •  
  •  
  •  
  • 1
  •  
  •  
  •  
  •  

Medlar Wine Recipe D.I.Y.

Hey Guys and Gals!

Are you looking for an awesome Medlar Wine Recipe you will find it below! So look no further you have found what you have been looking for! Below is the most awesome tasting Medlar Wine Recipe’s in the world.

Ingredients

Step 1
  • 8 lb / 3,600 grams Medlars
  • 3 lb / 1,350 grams sugar
  • Pectin enzyme
  • Water up to 1 gallon
  • 1/2 pint strong black tea
  • Campden tablet
  • Yeast nutrient
Step 2
  • yeast and nutrient

Instructions


 Equipment

  • Primary fermenter (carboy)
  • stirring spoon
  • hydrometer,
  • straining bag
  • siphon tubing kit
  • 1 gallon carboy or jug
  • an airlock and bung
  • Sanitizer
  • (A thermometer and brewing belt may be used to monitor and control temperature.)

Walmart

Make sure all equipment (i.e. stirring spoon, etc..) is sterilized you can bleach it or use . Contaminated equipment can let a stray yeast enter the wine and ruin it’s taste.

Instructions

Step 1

Place the ripe fruit in a fermentation bucket and pour over the boiling water. Add 1 lb. of sugar and an equal quantity of cold water.

Add the campden tablet, pectin enzyme and now its waiting time.

Wait 24 hours, then you will add your prepared yeast.

Step 2

 Yeast Hydration and primary fermentation: in a large cup add 4 ounces of warm chlorine free water.

Stir the yeast into the water then let mixture stand in cup for 15 minutes, make sure it is bubbling and then you will add it to your wine.

Take your hydrometer reading and calculate all the measurements.

Attach your airlock and wait for your fermentation to be complete, let ferment with the pulp for 5-7 days gently agitate daily.

After 5-7 days when the foaming calms down you will siphon your wine off of the sediment into your secondary container which is usually your glass carboy.

(The sediment is the stuff that accumulates at the bottom of your container.)

Step 3

After you strained into your secondary carboy wait till the fermentation activity dies down (could be between several weeks to several months)

Final Step

Although yeast activity will decrease as the fermentation process proceeds, there will still be fermentation going on as long as you still see some foaming or bubbling.

then rack into a clean carboy.

After fermentation has stopped completely any remaining sugar required to sweeten it to suit your taste.

When the Dandelion wine has cleared and is inactive – taste and bottle.

Stage 4: Aging / Bottling

You can repeat the racking process several times to get the maximum clarity though I would wait in-between each time a day or to, so the sediment can settle. I personally don’t like racking multiple times because of the risk of oxidation meaning the air touching it will give it a funny taste.

Bottle using the siphon cork and let wine sit for 6-12 months before drinking. Some would even prefer waiting 2 years!

What To Read

Other Great Things To Know

From Our Sister Website Terebelo.com

To spirits and cheers,

Binyomin Terebelo, Master Distiller and Drinkologist

Image by waldfey from Pixabay

Leave a Reply

Your email address will not be published. Required fields are marked *

google-site-verification=n5HhirnNxSXwjpmZmXp-dWFima0joB2Q8v2exw3ZaSA

Categories

X